
Add to Cart
17.8-18.3g/cm3 W95NiFe Tungsten Alloy Rod Tungsten Nickel Iron Rod
Specification
Product Name | WNiFe WNiCuTungsten Alloy Rod |
Material | Tungsten Nickel Iron Alloy |
Density | 15.8-18.50g/cm3 |
Composition | W content: 85-97%, W-Ni-Fe |
Surface | Sinter state, finish state |
Size | according to your drawing or requirement. |
Application | balance weight, Military industry |
Introduction
Heavy Tungsten Alloy are made of tungsten base (tungsten content is generally 80% ~ 98%) and a small amount of nickel, iron, copper and other elements. The density of high specific gravity tungsten alloy can reach 15.20 ~ 18.70g/cm3, which is also known as high specific gravity tungsten alloy or high density alloy material. Because tungsten alloy weighs more than twice as much as steel.
Specification
Chemical Composition | 90%W | 93%W | 95%W | 97%W | ||||||
State | Sinter | Vacuum | Forge | Sinter | Vacuum | Forge | Sinter | Vacuum | Sinter | Vacuum |
Density (g/cc) | 16.85-17.25 | 17.15-17.85 | 17.75-18.35 | 18.25- 18.85 | ||||||
Hardness (HRC) | 32 Max | 30 Max | 40 Min | 33 Max | 31 Max | 40 Min | 34 Max | 32 Max | 35 Max | 33 Max |
Tensile Strength (Max) | 770 Min | 900 Min | 1400 Max | 770 Min | 910 Min | 1440 Max | 735 Min | 920 Min | 700 Min | 850 Min |
Yield Strength (Mpa) | 620 Min | 620 Min | 1280 Max | 650 Min | 650 Min | 1340 Max | 650 Min | 650 Min | - | - |
Elongation (%) | 5 Min | 15 Min | 5 Min | 5 Min | 12 Min | 3 Min | 3 Min | 12 Min | 2 Min | 6 Min |
Application
Tungsten-nickel-iron alloy is characterized by high sintering density, good strength and plasticity, and ferromagnetism. It has good plasticity and machinability, good thermal and electrical conductivity, and good absorption capacity for γ rays or X rays
Package Inspection
We will offer material certificate after finishing production which includes chemical properties, mechanical properties, size and so on. Our products are packed by wooden boxes specialized for exportation. All of our products are separated by wet-proof paper.